Contact Us


High-Pressure Washer Wet SandBlasting Kit

Looking for an easy way to remove rust and stains? Then, this Dias Wet Sandblasting Kit is for you!

The Dias Wet Sandblasting Kit is the world's most powerful and effective. Don't waste your precious time trying to remove tough stains, rust, multiple layers of paint, or graffiti by hand! There's no need to resort to harsh chemicals like acids and thinners! Let the Dias Wet Sandblasting Kit  do your hard jobs. 

THe most EFFECTIVE wet sand blasting kit

The Dias Wet Sandblasting Kit  can be used to remove rust, stain, old paint or even graffiti,...making it the last sand blaster you ever need!

This amazing kit lets you convert your professional pressure washer into a wet sandblaster. Dias Wet Sandblasting Kit is also dust-free, more effective than dry sand-blasting, and is quick and easy!


The old traditional dry sand blasting kit creates a lot of dust, which is dangerous to inhale. If you use a dry sandblaster, it’s extremely important that nobody comes near without a mask, and this is very hard to do if you’re working from home.

Unlike dry sandblasting, our water-based sandblasting kit is mostly dust-free, since the particles of sand fall down together with water droplets. If you want to work on your project in your backyard, the Dias Wet Sandblasting Kit  is the way to go – it’s SAFE and ECO-FRIENDLY.

No more heat-damage

If you’re working with a heat-sensitive surface, such as a piece of plastic or thin metal, you don’t want your panel to get damaged by heat. Whether it’s warping, bending, or discoloration, heat can have irreversible adverse effects on some materials.

As you blast your surface with sand and water from DIAS WET SANDBLASTING KIT, the cool water keeps the temperature under control. When you wet sandblast, your surface will never overheat.

"I have never attempted sandblasting before. We decided to give it a try. Then would not have to rent an air compressor and sandblasting rig. The wet sandblasting works great. Set up it fast. I used it for exterior painting projects first. Will use it for many different projects.

The most important tip is to make sure the sand is dry. You have to make sure the black part which connects sandblaster's hose and nozzle should stand up. Or the water will go into the hose and wet the sand. The sandblasting will not work."

 - Chris Martin, US


TODAY ONLY: We're giving away 100 DIAS™ WET SANDBLASTING KIT + Free Shipping for the first 100 customers: 

 Get yours now, first come first served basis



"Works - removes rust and paint from metal - good surface prep - is lasting longer than expected."

"Used this with a 2k psi electric pressure washer - it has worked fairly well for paint and moderate rust removal, and overall surface prep. I used the finest grade black coal slag from Tractor Supply, and that worked really well. Does not clog, the tip is not eroding rapidly - even though that is what I expected. You can see from the picture when I started cleaning a rusty transmission cross member, the rust and paint on the left has been completely removed, leaving a textured, easy to paint surface. With about 10lbs (or slightly less) of the blasting media, I completely cleaned both sides of this part down to bare metal. I think those experiencing severe erosion of the tip may have been using too much pressure. The 2k range seems to be optimal."

- Jacob Felton, Florida 


"Absolute Good Accessory for Pressure Washer"

"Absolute good accessory for pressure washer. That is one of my best pressure washer parts. I restore old jeeps, tractors, dunebuggies and farm equipment. I did not know this sandblaster kit before. Since my friend told me, I searched and bought it. The power is 10x the strong turbo nozzle for cleaning surface area. And there is no dust. I stripped an entire jeep frame in 5 minutes. Super fast. Compared with air sandblaster, the wet sandblaster will have no sand in your hair, no huge protection suit and no air breather mask. It is simple to make it work.

My pressure washer is 1.8 GPM, 2100 PSI. Cheap pressure washer for home use. If you want to do small project to remove dust, I would like to recommend this one."

- Lynne Boudreau, TX


 "Wet Sandblasting Works!"

"I have a dozen cast aluminum patio chairs that are old and have peeling paint. I was concerned that my 2300 PSI pressure washer would not be powerful enough, but it worked fine. It takes practice to keep the sand from getting wet. From the description, the connection of nozzle and hose should be above permanent nozzle. If it is underneath permanent nozzle, the water will go into the hose of sand, wet the sand and then sand will not be sucked up.

To keep the sand dry. Also you cannot get too close. For my chairs, pool filter sand did not work well, but play sand did. The wet sandblasting work great and does the job."

- Ashley T., Boise Rivers, ID

 " I’d purchase again!"

"I wanted to prep my 14’ - 1995 Weldcraft boat for a new paint job, I am not finished but have made good progress. See the pictures attached. I do have some old glue that it will take off but only with a lot of effort, for that I am just going to hit it with a wire wheel on my grinder.

I will give you a few hints that took me a bit to figure out, first use a good blast media, not sand from the beach. I found the local Tractor Supply had Black Diamond fine grit blast media for under $10 per 50 lb bag and that is what I used. Second, elevate the blast media, it will draw easier with less problems than if it is at your feet, I set my media on a ladder that was about shoulder height. Third, keep the sand hose at the tip on the top, where water is less likely to back up into the media hose. It will still happen but less often. When this happens the media will clog the hose but simply pop the hose off and shake the sand out, put it back on and go to work.

I suggest mono goggles, a dust mask, and a hat. A face shield is a good idea too.

Overall I thought it was a good deal for the price, and although not a professional sand blast setup, it worked well. And I should mention I used an electric pressure washer at 2300 psi max."

- Mark D. Walters, Florida


Question: What is the best medium to use DIAS Wet Sandblasting Kit for the best results?

Answer: Play sand is the best media recommendation that you can use with the DIAS Wet Sandblasting Kit. You can also use baking soda and dry silica sand.

Question: What is the maximum PSI and maximum flow rate required to use DIAS Wet Sandblasting Kit?

Answer:The DIAS Wet Sandblasting Kit is ideal in cases where you have a pressure washer that is either light or medium-duty pressure washer, since it works perfectly with working pressures of maximum 3,500 PSI, Max flow rate is 2 GPM & Max Temperature:140°F/60℃.

Question: Is wet sand ok?

Answer:We recommend the use of dry sand. The wet sand is easy to stick in the tube and not easy to be sucked up.

Question: Can I just use this as a pressure washer or does it need the sand?

Answer:If you just use it as a washer, just connect the water wand directly to the water gun, no sand is needed. The sand is used to better remove rust and other stains.


Try the Dias Wet Sandblasting Kit completely risk free for 30 days. If for whatever reason you decide you aren't satisfied, contact our helpful customer support within 30 days of receiving your order and we'll refund you, no questions asked!


If you have any other requirements, please leave it at "order note" in cart or email support@shoprixa.com, or send us message on FB.com/shoprixa.
Disclaimer: We are not selling the Pressure Washers, we offer the compatible parts for them.

5% OFF code offer: "stayhome", it's pretty hard time for everyone, and we just want to remind you that it's best that you stay home watching Netflix. Just apply the code in checkout and claim your 5% OFF before quarantine ends.


(US customers only) Standard shipping time is 8-14 days to ship and arrive. 

All packages are seriously & strictly sterilized before being sent. 

For Non-US customers, shipping time may vary from 10-20 Business days. 

We'll immediately upload your tracking code to Paypal after the shipment, it may take 3-4 days to be activated. 


If for whatever reason, you decide you are not satisfied, you can easily and quickly contact our helpful customer support (support@shoprixa.com) to get an easy refund. We just ask that you send the product back to our warehouse!


- At Shoprixa, we believe our products are truly innovative and have 100% confidence in it. We understand that buying things online can be scary with companies not staying true to their customers so we go the extend to keep you satisfied. 

 - If you bought it and feel that it is not for you, don't worry. Just shoot us a message at support@shoprixa.com and we will make it right by offering you a replacement or refund. 100% Simple & Risk-Free process.

© Shoprixa. All rights reserved.